Skip to main content
도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Heating up the soldering iron properly, place the wick against the solder bulbs and heat the solder until the solder wick sucks up the solder.

Be careful to not leave the soldering iron on the board too long as you may remove the copper leads or damage the motherboard.

Solder the new battery's leads to the motherboard by taking the heated iron and heating the exposed wires of the leads and placing the solder in contact with the leads so the solder heats up and flows onto the leads.

Pull away the heat immediately once the solder has flowed and let the board cool to avoid damage to the board (or burns on your hand).

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.