메인 컨텐츠로 가기
도움말
1단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 25 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

If your glass is shattered, put packing tape over the entire panel to hold it together during the removal process.

Lay the heated iOpener over the rear panel for about two minutes to loosen the adhesive around the edge of the glass.

You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

Shift the iOpener to heat the remaining section of the panel for another two minutes.

A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.