주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 12 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

In the following steps you must pull the antenna cable between the DS Lite game cartridge reader and motherboard. Pull slowly and stop when you feel resistance to avoid damaging the cable or motherboard.

Position the antenna cable with its connector facing up and away from the motherboard using a spudger to hold it down lightly in the gap between chips on the motherboard.

Slowly and carefully pull the antenna cable until the cable connector is under the DS Lite game cartridge reader.

Continue pulling the cable until the cable connector comes out from under the game cartridge reader on the right side.

When reassembling and attempting to feed the antenna cable back under the game cartridge reader, the cable may kink or become difficult to feed through. If so, try feeding a piece of thread through first; then, tie the thread to one end of the cable connector and pull it through, guiding it past any obstructions.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.