주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Do not completely lift the circuit board off the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off the camera will break these soldering points.

Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge.

Locate the white ribbon cable attached to the underside of the main circuit board.

Gently remove the white ribbon cable from the connector.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.