주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Make sure the machine is turned off and unplugged.

Set your voltmeter in continuity mode and place the leads on the two 90 degree prongs on the boiler's heating element.

It does not matter which lead touches which prong as you're just testing for a break, or "open" in the heating element circuit.'''

If the voltmeter shows 0, or "open", then there is an issue with the heating element's continuity and it needs to be replaced.

If given a reading, then your heating element is fine.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.