주요 콘텐츠로 건너뛰기

Andis Master Clippers Motor/Coil Assembly Replacement

1 단계 번역중

1 단계
Andis Master Clippers Motor/Coil Assembly Replacement: 0 단계, 이미지 3개 중 1개 Andis Master Clippers Motor/Coil Assembly Replacement: 0 단계, 이미지 3개 중 2개 Andis Master Clippers Motor/Coil Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Caution: Make sure the clippers are unplugged from any electrical outlets before beginning teardown.

  • Using the Philips screwdriver, unscrew the two housing cover screws indicated.

  • using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the Coil Assembly.

  • Reminder: keep track of appropriate washers with each screw

  • Using the Philips screwdriver, remove the switch installment screw indicated.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.