주요 콘텐츠로 건너뛰기
도움말
19단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once all solder is removed, pry the dock connector straight down from the logic board using a metal spudger.

DO NOT remove the dock connector before all solder is removed, as the pins will rip from the dock connector and get stuck in the logic board.

If done properly, you should be able to see straight through the logic board where all 30 pins and the two metal joints used to be.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.