주요 콘텐츠로 건너뛰기
도움말
21단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Solder the two metal joints back to the logic board.

Place the tip of the soldering iron against the metal joint.

Melt solder so that it forms a dome on top of the joint.

Remove both the solder and the soldering iron tip from the solder pad as soon as enough solder melts onto the pad.

When complete, the soldered pads should have an ovular, pill like shape.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.