주요 콘텐츠로 건너뛰기
도움말
22단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Solder all 30 pins back to the logic board.

Heat all 30 pins with the tip of the soldering iron.

Melt a drop of solder onto the pins and spread it around with the tip of the soldering iron.

Repeat until all pins are covered in solder.

Make sure solder covers every pin and pushes through to the other side of the logic board.

DO NOT push too hard on the pins with the tip of the soldering iron as you could bend the pins.

Remove any excess solder with desoldering braid.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.