주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Check motor operation by pulling connector and applying 9V with an external power source (battery or bench supply) to the plug.

If the motor turns with reversed polarity then proceed by swapping black and red contacts leading to the motor. With a little flathead screwdriver press the contact spring, pull out the cable.

If the motor only turns by applying external power and a little twist or not at all, only solution is to replace the motor. Mabuchi RF-500TB-12560 is readily available on the internet.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.