Skip to main content
Help
8단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

After about a minute, flip the phone over and use a plastic card to tear through any remaining adhesive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.