주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Soldering will be required to connect the new digitizer.

Any remaining wire left from the old digitizer will need to be removed from the motherboard.

Take care not to burn yourself or damage the motherboard, wires, or new digitizer while soldering.

Solder the new digitizer to the soldering point shown within the image.

Using wire strippers, strip the end of the gray wire connected to the new digitizer about a 1/8".

Solder the gray wire to the soldering point on the motherboard as shown within the image.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.