주요 콘텐츠로 건너뛰기

HP ProOne 600 G1 Memory Upgrade

7 단계 번역중

7 단계
HP ProOne 600 G1 Memory Upgrade: 0 단계, 이미지 2개 중 1개 HP ProOne 600 G1 Memory Upgrade: 0 단계, 이미지 2개 중 2개
  • To replace the back cover (access panel), set the panel on the back of the computer, slightly above the stand, and slide it down into place.

  • After this is complete, reconnect the power cord and external devices. Then place the computer in the upright position and turn on the computer.

  • It will automatically recognize the additional memory while booting.

  • With Windows 7 Pro: If it prompts you stating that the memory size has changed since the last startup, press F1 to record the new configuration.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.