주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the following five screws:

One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).

Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.

One 10 mm Phillips near the optical drive.

One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.

Lift the EMI fingers above the battery connector away from the metal framework.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.