주요 콘텐츠로 건너뛰기

안티클램프를 사용하여 iPhone 6를 여는 절차

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 59개에 영향을 미칩니다.

2 단계 번역중

2 단계
iPhone 6 Anti-Clamp Opening Procedure: 0 단계, 이미지 3개 중 1개 iPhone 6 Anti-Clamp Opening Procedure: 0 단계, 이미지 3개 중 2개 iPhone 6 Anti-Clamp Opening Procedure: 0 단계, 이미지 3개 중 3개
  • Pull the blue handle forwards to lock the arms.

  • Turn the handle clockwise 360 degrees or until the cups start to stretch.

  • Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait a few seconds between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

파란색 손잡이를 앞으로 당겨 팔을 잠그세요.

손잡이를 시계 방향으로 360도 돌리거나 컵이 늘어나기 시작할 때까지 돌리세요.

흡입 컵이 서로 정렬되어 있는지 확인하세요. 정렬에서 벗어나기 시작하면 흡입 컵을 약간 풀고 팔을 다시 정렬하세요.

Anti-Clamp가 충분히 큰 틈을 만들면 스크린 아래에 여는 픽을 끼우세요.

Anti-Clamp가 충분한 틈을 만들지 못하면 핸들을 1/4 바퀴 돌리세요.

한 번에 1/4바퀴 이상 돌리지 말고 돌릴 때마다 몇 초간 기다리세요. Anti-Clamp와 시간이 일을 하도록 하세요.

다음 세 단계는 건너뛰세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.