메인 컨텐츠로 가기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.

Do not lift the AirPort board too high, or you could damage the contacts or socket.

Pull the AirPort board straight out of its socket on the logic board.

There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.