주요 콘텐츠로 건너뛰기
도움말
12단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 2 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.

Again, there are thin metal rails running along the inside of the rear panel, so take great care when inserting the putty knife.

Once the putty knife has cleared the lip of the rear panel, angle the putty knife so that it is vertical, and carefully (but firmly) wiggle it straight down into the iPod via the gap between the plastic opening tools.

Push with your fingers on the rear panel behind the putty knife to minimize bending. Ever so slightly flex the putty knife to ensure that most of the metal tabs on this side of the iPod are disengaged.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.