How to reduce ChiliCube noise level by replacing fans

영어

한국어

7 단계 번역중

7 단계

Fan bracket/shroud removal

These instructions are written as if you were only replacing one fan, but you may want to do these steps to both fans at the same time.
The 2 screws supporting the fan are on the heat sink side of the bracket/shroud, so we remove the bracket first, so we can get to those screws next.
Remove four screws holding the bracket/shroud to the heat sink.
Tilt the bracket/shroud out. It may take a little more force than you would like. Thats OK. Try sliding it side-to-side as well.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.