주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Remove the four Phillips #00 screws securing the volume and mute switch.

The volume switch assembly sits on top of the mute switch. Make sure that the small soft pad on the mute switch is not lost, otherwise the mute switch will sit very loosely after reassembly.

The mute switch assembly screws should be tightened with the switch in the off position. Check the protrusion of the switch when turned on, since it may not stick out far enough to operate if the switch assembly is incorrectly positioned. (Check the gap between the switch frame and the bezel (white gap showing between the two screws near the 6). The screw on the far right is slightly longer than the other 3 screws. When reassembling the phone, keep this in mind.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.