Skip to main content
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Pry up the black tabs, 2 top and 2 bottom, to release the face of the clock.

Find the 5 black devices on the circuit board. Here they are labeled 270, 510, and 3 at 181. These are what need to be resoldered.

Carefully remelt the solder at each end of each device. You probably don't need to add any solder, and you don't want to make any solder bridges where they shouldn't be.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.