주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 12 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Disconnect the camera cable by sliding it horizontally out of its socket.

Pull the cable parallel to the surface of the logic board, in the direction of the optical drive. Do not pull straight up, or you will destroy the connector.

If you see a small plastic retainer stuck to the logic board that prevents the camera cable from sliding out, peel it up carefully from the logic board. Apply a little heat from a hair dryer or heat gun if necessary to help soften the adhesive holding it in place. Do not attempt to forcibly disconnect the cable with the retainer in place.

If you still have trouble, use the point of a spudger to push at each side of the connector and "walk" it slowly from its socket.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.