Skip to main content
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

In the following steps, you will be working on your new upper case.

Use a Y1 Tri-wing screwdriver to loosely install the 1.2 mm set screw included with your new upper case into its tapped hole near the middle of the trackpad opening on your new upper case.

Only tighten it about one turn for now.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.