Skip to main content
도움말
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 15 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

In the following steps, you will use a metal spudger to lift the front panel out from the rear case of your TouchPad.

The front panel is held in by seven clips (boxed in red) that are lightly anchored to the rear case. When you remove the front panel assembly, you are bound to break either the clips or their supports attached to the rear case. We will update this guide as we find replacement parts or a better method to remove the panel.

As you remove the front panel assembly, also be careful not to damage the ambient light sensor (boxed in yellow) or the two antennas (boxed in orange).

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.