주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Here we are: the moment of truth. It's time to get that solder flowing.

Set the tip of the soldering iron on the two parts to be connected. In this case, that's the resistor lead and the copper trace on the circuit board.

Touch your solder to the tip of your soldering iron to melt it onto the joint. Don't hold it there for more than a second or two.

Quickly, but not frantically, pull both the soldering iron and the solder away from the joint.

Your solder joint should be shiny and conical, and not expand beyond the copper trace.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.