주요 콘텐츠로 건너뛰기
도움말
9단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Before re-installing the primary chain inspection cover, make sure the rubber O-ring on the inside of the primary chain inspection hole is clean and properly seated.

Also make sure that the rubber o-rings are clean and in proper condition before replacing the screws in the primary chain inspection cover.

Using a 5/32" Hex or Allen screw head, re-install the primary chain inspection cover.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.