주요 콘텐츠로 건너뛰기

iPhone 6s Upper Component Cable Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

3 단계
iPhone 6s Upper Component Cable Replacement: 0 단계, 이미지 3개 중 1개 iPhone 6s Upper Component Cable Replacement: 0 단계, 이미지 3개 중 2개 iPhone 6s Upper Component Cable Replacement: 0 단계, 이미지 3개 중 3개
  • Try not to wrinkle the strips during this procedure—they will become very difficult to deal with and will not straighten out again.

  • Pull one of the adhesive strips straight out, towards the bottom of the iPhone.

  • For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue to pull steadily, re-grabbing the strip closer to the iPhone if necessary.

  • Continue pulling until the strip is fully removed.

  • If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.

  • If one of the adhesive strips breaks under the battery during this procedure, and cannot be retrieved, remove the remaining strip, and then skip to Step 48.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.