주요 콘텐츠로 건너뛰기

iPhone 6s Upper Component Cable Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

5 단계
iPhone 6s Upper Component Cable Replacement: 0 단계, 이미지 2개 중 1개 iPhone 6s Upper Component Cable Replacement: 0 단계, 이미지 2개 중 2개
  • If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

  • After about a minute, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.