주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

You'll need either a 10mm socket with ratchet or a 10mm wrench.

A #2 Phillips screwdriver with 8 inches of shaft or longer, and preferably with magnetic tip.

You can rub a magnet against the tip to temporarily magnetize it.

The sandpaper and file are only necessary if the 3D printed impeller isn't a perfect fit.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.