주요 콘텐츠로 건너뛰기
도움말
9단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Lift out the old impeller making sure the TWO thin steel washers underneath the impeller do not fall out. These are very important for the overall height of the lower burr and thus grind fineness.

NOTE: Discard the fibrous felt ring below the impeller. It is usually in pretty bad shape. This piece is no longer needed as the new impeller design hugs the bushing pedestal more closely and does a good enough job keeping grounds away from the bushing and drive shaft.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.