주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Firstly the power and Sata cables should be disconected - they can be removed by just pulling them straight back.

After this is done it should look like the second picture.

Lastly four screws need to be removed that secure the Hard Drive to the case.

Extreme care should be take here as the Hard Drive should be supported when loosening off the last screw. Be careful not to press on the casing and only hold it by the edges.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.