주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Attach the black lead first, followed by the red lead, and finish with the white lead.

Place the wire from the new battery onto the new solder bead.

Press the tip of the soldering iron onto the solder bead until it melts.

Slide the wire lead into the liquid solder until the wire goes through the center of the bead, then remove the soldering iron.

Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.