주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The shafts are held by bushings which are threaded on the outside. Nuts on the inside of the carriage hold the bushings in place.

Unscrew the bushings. You may need to hold the nuts on the inside with a finger or needle-nose pliers.

5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-32, length 1/8"

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.