주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the cam lock arm spring from the left side of the carriage.

Extension spring, OD 0.123", WD 0.014", compressed length 0.34"

This spring pulls the arms against cams fixed to the digit shafts so that the digit shafts will not rotate when the zero-setting mechanism is not operating. It is important that the digit shafts themselves not rotate, since each digit wheel needs to be able to rotate freely on the shaft.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.