주요 콘텐츠로 건너뛰기
도움말
12단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

reattach the leads starting with the central (white) strand directly to the PCB

Then solder one strand of the shield to the opposite side of the circuit board

Flip the plug over and solder the remaining end of the shield to the opposite side

Hint: The goal here is to make sure that the divided shield distributes any strain equally between front and rear sides and avoids straining the central wire

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.