주요 콘텐츠로 건너뛰기
도움말
15단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To finish up;

slide the grommet back down to the end of the cable and use a pair of pliers to gently squeeze the metal clamp shut again

Optionally seal the PCB with Areldite or perhaps hot glue but you can get by just fine without

Slide the plastic cover back down over your work - it'll probably be tight enough to snap back into place but if not a couple of drops of super glue should be enough

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.