주요 콘텐츠로 건너뛰기
도움말
15단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Before attempting to remove the screen or any other components left in the shell, make a careful note of how each cable is routed. Take detailed photos if your laptop is not identical to this one.

Lift the WiFi antenna leads out of their routing channels.

Whilst supporting the screen, remove six 6.5mm screws from the screen hinge and lift off the screen.

Note that one of the screws on the right hand hinge has an earthing strap under it. On reassembly, take care that this strap isn't caught under the hinge and is secured by the screw when replaced.

To remove and replace the power connector and lead, remove the right hand speaker, secured by two screws at the base of its sound box.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.