주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Unbend the wire holder on the inside of the front right of the frame to get slack in the wires attached to the radiator.

Carefully move the radiator to the right side of the bike, out of the way of the cylinder head.

The radiator is not completely disconnected from the bike, there are still wires connected to the thermo-switch and fan. Be sure that you do not put too much tension on these wires or you risk ripping them out of their sockets.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.