메인 콘텐츠로 스킵하기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Begin by placing a jack under the lifting point. It is on the driver's side of the car, below the rocker panel and just behind the front wheel.

Lift the car with the jack until you can work underneath it.

Slide a jack stand under the car, just behind the jack.

Slowly lower the jack until the jack stand is supporting the car. Remove the jack.

Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it.

Never work underneath a car that is only supported by a jack. The jack may slip or fail, resulting in serious injury or death.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.