Skip to main content

단계 유형:

끌어서 재배열 합니다

The AC Compressor Control Valve is located behind a backing plate on the rear of the AC compressor. The AC compressor itself does not need to be removed. A short 10mm box end wrench will get the job done. A ratchet and 10mm socket will help.

Since this step occurs adjacent to an exhaust manifold, use appropriate gloves to protect your skin from hot surfaces.

Remove plate with bolts. Set these items aside, they will be re-used. This is a good time to clean the plate and retaining bolts. A small amount of WD40 and shop towel will work fine.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.