주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

When inserting the headlight assembly back into the housing, make sure that the housing locator guides fit into the catches on both sides of the assembly.

Push the assembly into the housing until you hear it click into place.

Again use the 5mm nut driver to turn the locking nut that locks the assembly in its housing.

Turn on the ignition and check that the new bulb works. Close the hood.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.