메인 콘텐츠로 스킵하기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Tilt the gray metal box from the left to the right. Do not try to pull it off.

Once you tilt it, you will see a wiring harness that is connected to the box via some tabs. Pull those gently apart, remove the shielded cable.

The harness is terminated via a connector to the side. Unplug the connector by GENTLY pulling on the side of the plastic. Do not pull on the wires.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.