Skip to main content
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The next wiring to remove terminates to the top to another connector. This one is a little trickier and must be removed by squeezing the tabs on the side while pulling the connector.

In my case, do to a broken clip on the side of this connector I opted to leave it connected. That way, I can not totally remove the metal cover, but will have to turn it over.

Once the wiring harnesses are disconnected and they are off the metal tabs, tilt the metal cover to the left. Check continously that all the wires are off and nothing gets hung up.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.