Skip to main content
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Set aside the printer body.

Unscrew the T10 12 mm Torx screw.

Remove the plastic tab holding the glass in place.

Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of force to get the panel to slide out. If not removed carefully, the scanner glass can shatter

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.