Skip to main content
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Begin by removing the small piece of black foam located at the top right of the LCD screen. (Picture 1)

Remove screw which is located exactly where the black foam was. (Picture 1)

After screw is removed lift right side of LCD screen straight upward and pull to towards the right side of the camera. (Picture 2)

The LCD screen will pull out of the camera and 2 ribbon circuits will need to be detached.

Detach both by carefully pulling out of black locking mechanism. (Picture 3)

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.