Skip to main content
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the screw at the upper right corner. (Picture 1)

Carefully work the ribbon circuit, pictured at the left side, back and forth to free it from the plastic retainer. (Picture 1)

Lift the black locking mechanism up (Picture 2) and gently pull the ribbon circuit to detach.

Upon completion of this step, the lower circuit board should be attached in one place and be freely hanging as shown. (Picture 2)

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.