Skip to main content
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Gently lift the rear circuit board away from the camera.

The film behind it is attached, but not securely. Keep the circuit board and the film together to avoid damage.

Rotate the circuit board 180 degrees so that it is directly below the camera.

Now gently remove the front circuit board and rotate both the rear and front circuit boards 180 degrees so that they are directly above the camera (picture 2).

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.