주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable.

Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

Peel the dock connector ribbon cable off the rear panel.

Do not try to completely remove the cable, as it is still securely attached to the rear panel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.