Skip to main content
Help
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

To start, let's solder a large component held to a circuit board with thru-hole solder pads.

A capacitor was already removed from the two solder pads. Each pad was heated while the capacitor was pulled away from the board.

Notice how the solder holes are completely covered with solder. Opening these holes -- so the capacitor lead can be pushed through -- will greatly simplify installation.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.