메인 콘텐츠로 스킵하기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

There are a total of 8 screws that will need to be removed for this project. 6 external and 2 internal.

Use your #1 screwdriver to remove the 6 external screws and remove the back plate of the controller.

Remove the 2 internal screws and remove the controller board.

Remove the 3 rubber pads and all the buttons from the front controller cover and controller board and set them off to the side for now.

I put the 8 screws in a container with enough rubbing alcohol to submerge them. This removes years of dirt and they come out looking like new. This is completely optional.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.