주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Some models have a small GSM flex cable (Shown in the 1st picture, circled in red). There is a piece of tape covering it and will need to be removed. Then underneath the tape, there is a small tab, which is closest to the LCD screen. Lift gently on this tab with a smudger tool. In a later step, the flex cable will be removed from the board.

Remove the screws from the metal plate on the power button, and gently detach the connector where indicated. During the removal, the metal cover and the rear facing camera may come out together.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.